2016-01-07; 14:10:33 EST
Member Since
2014-05-06
Posts: 3821
It turns out my '93 has the right angle tang design with 2 screws holding it to the underside of the cabin top plywood core. Gained access by removing the hatch over the head. No core rot. One screw was sheared, probably when the forestay pin failed 10 years ago. Since then, the other screw has been slowly tearing through the wood while the tang re-bent. I'm going to have the pros cut out and replace the sliver of core supporting the block. They will secure the chainplate with screw tapped through the liner, hiding them with the hatch cover framing. Rick __See the original archive post