The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



Chainplate access

2016-01-07; 16:46:27 EST

Member Since

2014-05-06

Posts: 3821

Rick:

On my boat the chain plate was positioned between the deck core and the
inside liner rather than the reverse as you seem to suggest. If they are
inserting a piece of core to replace what was damaged I would be strongly
inclined to use epoxy rather than 5200. Epoxy is stronger and if the block
and surrounding area is completely coated in epoxy it is unlikely that rot
will ever take hold there. It is also important that the new block be very
strongly attached to the surrounding core material and epoxy is best for
that as well. If your boat is like mine was the chain plate is held to the
core with only one small screw. If the block it is attached to breaks loose
the chain plate will wobble and water will begin to work its way in through
the slot in the deck. Actually, because the single screw is so unstable, the
wobbling will probably occur anyway and that is all the more reason to have
the whole are sealed with epoxy. 

My 2 cents worth.

Graham

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting