The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



Gelcoat Repair/ New Headsail furling system

2016-03-22; 15:07:29 EDT

Member Since

2014-05-06

Posts: 3821

Graham,

Here is an example of a system that allows quick changes.  You'll notice
that the sail foil has two slots in it.  The sails will have a bead that
feeds into these slots.  The sail is hoisted like a traditional jib with a
halyard.  When you want to change sails you can start the new sail in the
tube, loosen the halyard to lower the current sail, move the halyard to the
new sail and then hoist away.  You'll also need to move the sheets as well
or have a 2nd set of sheets.

If you only need to change sails prior to setting out, then you can hoist
whatever you need calmly after dropping the existing sail.  This also
allows you to easily store your sail for extended times when you are not
sailing.

http://www.westmarine.com/buy/harken--mkiv-unit-1-furler--8712648

Hank

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting