The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



New Headsail furling system

2016-03-24; 10:10:10 EDT

Member Since

2014-05-06

Posts: 3821

I have an old Cruising Design furler. The luff has a rigid aluminum tube
with two sail tracks that allow me to raise and remove my headsail easily.
Although I have never tried it, I could raise two sails for a wing on wing
configuration gong downwind. It works great and has never failed me.

What I don't like about the system is that the rigid luff pieces (about 5')
are linked together with alumimium pieces that are not really strong enough
to take the stresses of the furling gear when the mast is down. They can be
bent and once this happens they cannot be straightened. They can also fall
out and so far as I can tell the pieces are no longer available anywhere.
This means that I will probably need to replace the entire gear once I am at
that stage of my rebuild.

I don't want to spend a fortune on new gear and am inclined towards the new
Cruising Design model (CDI FF1 or FF2) that has a flexible luff in that it
will coil for shipping and bend for raising and lowering the mast but still
has tortional stiffness for furling. Sounds great but does it work? I do not
know anyone with this system and wonder whether any of the rhodies out there
have experience with it. If so do you have the FF1, designed for boats up to
21' or the FF2 for boats up to 28'. Presumable the latter is the best
choice. The FF2 is $750 in Canada and about 625 in the US. Getting stuff
shipped to Canada costs a fortune.

If anyone has either advice or alternatives to suggest that would be
welcome.


Graham Stewart
Agile. R22, 1976
Kingston Ontario Canada




See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting