The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Graham Stewart



Change to diamond shaped CB?

2016-05-09; 12:36:06 EDT

Member Since

2005-04-29

Posts: 816

Based on postings to this list over the years, Mary Lou 's comments reflect
my own understanding of the difference between the diamond board and the
older board. It was also my understanding, possibly incorrect, that boats
coming from the plant as refurbished boats have the diamond boards installed
so it is possible that the date of original construction might not always
reflect which board is installed.

I have the original rudder style board that drops into the keel and rotates
on a pin. The centerboard housing cap is removable allowing the centreboard
to be lifted out. Very early boats did not have a removable cap so removing
the centreboard was a much more involved process. My understanding, and I
stand to be corrected, is that this installation and pivot pin arrangement
is the same for the traditional centreboard and the diamond board.

My view is that the diamond board is a refinement that would allow for
slightly improved performance for those who have the knowledge and skill to
take advantage of such things. While I would choose the diamond board in
theory, I would definitely give much greater weight to selecting a boat that
had been maintained in good condition and had the comfort features that I
wanted.

I would be very reluctant about beaching the R22 regardless of the
centerboard used. I don't think the board makes any difference to how the
boat is launched from or retrieved onto the trailer.

In the final analysis, the for the authoritative answer about such matters
you need to ask Stan.


Graham Stewart
Agile. R22, 1976
Kingston Ontario Canada




See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting