That is interesting. I have never in 23 years of having a Rhodes and a triad trailer been able to load the boat far enough forward to have too much tongue weight. I usually float boat as far firward on trailer as possible and the act of hauling her out the boat loads back a little. If I don't snug her tight enough to the V cushion she will end up with negative tongue weight. After haul out the V cushion slides out to the boat to stabilize during transit.
Sent from my iPhone
Charles Nieman
s/v Daydreams
98 R 22
> On Jun 16, 2016, at 6:29 PM, talbotpratt <talbotpratt at gmail.com> wrote:
>> My new/used 89 Rhodes22 came with a 5 year old Triad custom trailer.
>> First, the simple question: Brakes are rusted and unusable without service,
> and I was told it is not worth trying to keep them working since the boat is
> launched in salt water. What do you think?
>> Second: The trailer is the custom built Triad Rhodes 22 model. ei. no
> adjustments other than extending the v shaped bow cushion arm that the stem
> is snug into. When the boat was last loaded it appears to have been pulled
> up toop far on the trailer. First, the tongue weight appeared really heavy
> based on the effort needed to crank up the swivel wheel and the load when
> hitched to a large tow vehicle. Second, the forward end of the long bunks
> was denting the hull on both sides. I put a temporary cross piece in about 6
> feet aft of the bow and jacked up several inches to take the load there in
> order to pop the dents back out. I have since launched the boat for the
> season but need to figure out how to set up the trailer better before
> reloading this fall.
> If I extend to v shaped cushion arm out all the way I can move the boat
> about 6-8" farther back on the trailer. That will help some, as the hull
> will be a little thinner and less weight will be forward of the bunks. But
> I don't think that will be enough. Plus, when I look at the trailer, I'm
> surprised that ALL the weight is on those two long bunks. There is nothing
> under the keel, nor under the bow section. I don't understand why it was
> done like that. Anybody with a Triad trailer that can help me?
>> Talbot
> Rhodes22 89/08 "Remains Nameless"
>>>> --
> View this message in context: http://rhodes-22.1065344.n5.nabble.com/Triad-Trailer-brakes-and-adjustments-tp52121.html> Sent from the Rhodes 22 mailing list archive at Nabble.com.
> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list>> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list> __________________________________________________
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.