2016-06-24; 18:13:43 EDT
Member Since
2016-05-13
Posts: 19
Graham, " the front brace (with the V cushion) should first be retracted all the way and then returned to touch the bow of the boat only once it is hauled out. " Ah, I've never seen this mentioned here previously but sounds like exactly what I need to do. Thanks so much. I've had good success motoring onto trailer at 2 knots or so and getting boat up to V but when I pull it out, even a little, bow lifts away. I cannot crank hard enough to move boat further fwd. As I have only a 1/2 mile from launch to house and speeds below 20 mph, I've left it . Attempts to bring fwd by heading down hill (slightly) and slamming on brakes did not move boat. Tongue weight seems fine. This being Maryland, I fear I'll have to pay to get brakes fixed (totally disintegrated) before I can pass inspection to get a tag for longer trailering. Right now I do what so many locals do and take chance with out of date tag for the 1/2 mile tow. I do launch with trailer extender back about 2'. This seems to get boat just deep enough into water with truck tires in water just touching bottom of rims. Brooks Bridges "Changes" 88/2008 Cambridge MD ----- Brooks Bridges 1986, Recycled 2006 "Changes" Cambridge, MD -- View this message in context: http://rhodes-22.1065344.n5.nabble.com/Triad-Trailer-brakes-and-adjustments-tp52121p52189.html Sent from the Rhodes 22 mailing list archive at Nabble.com.See the original archive post