2016-06-29; 16:37:51 EDT
Member Since
2003-04-15
Posts: 1937
Ric, Good question. The photo that Graham included: http://rhodes22.org/pipermail/rhodes22-list/attachments/20160629/59e4a8a3/attachment.jpg does have the (my words) the guide boards and keel support boards. My Triad trailer has both and I believe both are necessary. The keel support boards (in my experience) keep the keel vertical and the boat positioned properly when transporting. Before I replaced all of my boards, the keel support boards rotten, broke, and provided no lateral support. During transport, my whole boat rotated a couple of degrees and ended up cockeyed on the trailer because there was nothing to prevent the keel from moving. I believe those boards are needed for that reason. As far as the guide boards, they greatly aid in loading the boat if used correctly. I always had a devil of a time getting my boat positioned correctly on the trailer when pulling the boat. I'd get it cockeyed and even once had the keel rest on top of the keel support board, which broke it. I learned from discussion on this list (might have even been from Stan), that is you leave the centerboard down when loading it's a piece of cake. The centerboard will center the boat up using the guide boards and then centerboard will lift up when it hits the roller on the trailer. Now all you have to do it winch the boat up into position. You must remember to then pull up and secure the centerboard. You don't want the centerboard unsecured during transport and certainly not when putting it. I can load perfectly every time now. I believe Stan does it this way and he actually will motor up on to the trailer. I don't have the courage to try this but he swears by it. Rob LoweSee the original archive post