The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Graham Stewart



Triad Trailer brakes and adjustments

2016-06-29; 21:39:40 EDT

Member Since

2005-04-29

Posts: 816

I tried to take the pressure off the strut by using a scissor jack under the
bow (see photo) but I have subsequently removed it and can't say that I see
a difference. I would not put a jack under the keel given the inordinate
amount of time I spent fixing it last year. 

My plan is to reinforce the hull with layers of roving and mat in the area
of the strut but obviously I don't want to do that while it is deformed. I
have removed the floor stringers and boards as part of my reconstruction and
also removed the internal bulkheads and compression post. So I currently
have unobstructed access to the hull.  I thought I might launch the boat to
see if the deformation changes  before I add the additional stiffening
layers of cloth but until I put in the floor structure and bulkhead I can't
reinstall the compression post and without that I can't sail the boat.
Leaving the interior reconstruction for a season would not be terrible but I
would sure hate to do that if I can't sail. So I seem to be caught in a
conundrum. The other alternative is to just live with it as is. This is when
being a compulsive sort is a real pain in the ass.


Graham Stewart
Agile. R22, 1976
Kingston Ontario Canada





Scissor jack under bow Sept 2014.jpg
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting