The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Ric Stott



Galley Rebuild

2016-07-06; 15:20:05 EDT

Member Since

2013-07-01

Posts: 438

I forgot to change the subject line - sorry. 
Here it is again. 

HI Graham
I rebuilt my galley this year and have attached a few pics.
The top is Corian I got for free - a scrap from a large job by a solid surface contractor I know. 
I used the old one for a template.
The Mahogany is 5/4 x 4 decking that I cut up - its cheap and looks great - I have Teak oiled it since photo and it looks even better. 
The Plexi is thin - 1/8” from Home Depot (I got that for free too, because the check out could not find a price or skew)  and stiffened with the 1/2 x 1” mahogany strips.
The tracks are the same mahogany with carbide tip saw cuts, which were the perfect width for the thin plastic. 
I was worried that the plexi was too thin, but it works and looks great, and the price was right. 
I cut a piece to fit over the original Coleman cooler and it looks pretty good too. 
I bought on-line,  a set of three pull out plastic drawers, 24” total height, which fit perfectly into the space the right of the sink. 
I would add a better faucet and pressure pump and foot pump too in my perfect world, but this works fine for now. 
I made the swing out bracket for the GPS out of mahogany too and it works great. 
Those cups under the counter top are for ‘under-counter' lights that I planned to install, but I have since decided to install  LED strip lights instead. 
The switches to the left are for 4 mast lights, Steaming - Anchor - Down Light - Windex light. 
The main Panel is located under the Companionway, as the original. 
Ric 
sv Dadventure 


See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting