2016-07-06; 20:19:51 EDT
Member Since
2016-04-14
Posts: 715
Olivier, Here’s some info on the strut: The brand name printed on it is ‘SpringLift’. A quick internet search reveals that this is probably made by a company called Attwood Marine. Looking at their website (http://www.attwoodmarine.com/store/product/oem-gas-springs <http://www.attwoodmarine.com/store/product/oem-gas-springs>), and checking against some measurements I took, I’d say this unit is one with an extended length of 12.04”, a compressed length of 8.46”, and a stroke of 3.58”. Unfortunately, there are several variations available with these specifications. I’ll be back on the boat on Friday, and will take a closer look and see if I can find a part or model number on the strut. The attachments for the ends of the struts are another issue. There’s no indication that Attwood sells these. My guess is that they are custom made by the elves at General Boats, probably out of 1/8” aluminum stock. And here I’m just talking about the brackets. There’s another piece at each end that attaches the end of the strut to the bracket. At the moment, I have no idea what that piece might be. Again, I’ll take another look on Friday. The easiest approach here may be to contact General Boats and see if they will sell you a kit for this. As I recall, you’ve got the ‘Certificate of Support’. I’m going to attempt to attach a picture, which may help clarify. Graham, If that picture comes through, it will also have a pretty clear shot of one of the laz hinges. Oddly, it seems to be of a design that would allow for the hatch cover to be easily slid to one side and removed, except that the gas strut won’t allow it. Peter Nyberg Coventry, CT s/v Silverheels (1988/2016)See the original archive post