2016-07-09; 15:50:27 EDT
Member Since
2016-06-29
Posts: 30
I went to Talbot's trailer yesterday and measured it. There were some small variances from the drawing sent by Rob Lowe. Most are minor - 1/4" longer etc. But the height of the supports are reversed. That is to say the drawing sent by Rob shows the rear supports at 15.5" and the front at 16.5". Talbot's trailer is 16.5 for the rear supports and 15" for the front (15.5" to the cross member but 15" from the top to the frame.) Does anyone know the height of theirs? Knowing the height on a couple more trailers would show which trailer is wrong. - The one the drawing was done from or Talbot's. My instinct tells me Talbot's bunk supports are reversed because I think the front need to be a little higher than the rear to account for the change in hull angle toward the bow. Talbot - I don't think this would contribute to extra weight forward of the axle as it's only a slight change in angle. -- View this message in context: http://rhodes-22.1065344.n5.nabble.com/Triad-Trailer-brakes-and-adjustments-tp52121p52311.html Sent from the Rhodes 22 mailing list archive at Nabble.com.See the original archive post