>> Looking at the original email the axle location of 70" from the rear is 6"
> further back than the older trailers. I'm going to put mine at 70" and
> retain forward adjustment.
>> Talbot - If you moved your axle 6" forward this would remove between 125
> and
> 150 pounds from the tongue. I calculate an empty R22 at 11 pounds per
> inch
> and loaded maybe 13. So for every inch you move the axle forward you take
> 11 pounds from the front and move it to the rear making a 22# shift per
> inch
> of axle movement. I think your leaf spring brackets are welded. I will
> let
> you know where my axle ends up so you can decide if you want to have a
> welder move them.
>> I'm not positive about the angle. Talbot's front ones are 33 deg and the
> original drawing is 38 deg. I had a hard time getting the rear support
> angle. Because of this I'm planning to putting the bunks on swivels.
> This
> would make for more even pressure.
>> Another thing I forgot to mention is the rear supports on Talbot's trailer
> are 70" (outside to outside) at the trailer level and 167 at the top.
> There
> is a visible slant inward when you look from the rear. Other trailer
> pictures I have seen don't seem to have this.
>> I think I am going to put the bunks on swivels but it would still be good
> to
> know if they should be straight or have the slight inward slant.
>> Mark
>>>> --
> View this message in context:
>http://rhodes-22.1065344.n5.nabble.com/Triad-Trailer-brakes-and-adjustments-tp52121p52324.html> Sent from the Rhodes 22 mailing list archive at Nabble.com.
> __________________________________________________
> To subscribe/unsubscribe go to
>http://www.rhodes22.org/mailman/listinfo/rhodes22-list>> For the list Charter and help with using the mailing list and archives go
> to http://www.rhodes22.org/list> __________________________________________________
>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.