The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Hechts



Installing tiller lock box in cockpit coming

2016-08-01; 16:05:19 EDT

Member Since

2016-05-04

Posts: 45

I'm trying to improve the tiller lock options for short times away from the tiller. Fretless has the clip on the side rail but I've found it doesn't hold that well. I've got it working for now but also wanted to try installing the lockbox in the cockpit coming as I've used on other boats. 

I bought the Forespar lockbox from West Marine and took it out to the boat yesterday for test fitting. The problem is that, anywhere I could mount the lock box in the coming will put the tiller extension at a very extreme downward angle from the tiller to the lockbox. Far too much of an angle to allow the tiller to be adjusted if it would even lock at all. I'm sorry I didn't take pictures but the closest angle I could get has to be more than 30 degrees below horizontal...it was not even close. 

I know using a lockbox should work as I've seen it (and used it) on other Rhodes 22s. In case it matters, my tiller extension mounts on top of the tiller. I've considered whether moving it to the bottom of the tiller would help, but even that wouldn't get the extension near horizontal and I'm sure that would make using the extension elsewhere around the cockpit impossible. I checked and the tiller was all the way "down" (perpendicular to the rudder post). I'm struggling to understand what could be different about the basic geometry of my cockpit sides, tiller and tiller extension that makes it seem impossible to use this lockbox. 

Thanks,

Olivier
s/v Fretless
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting