2016-09-12; 09:48:22 EDT
Member Since
2010-04-07
Posts: 261
Hi Chris:
I've been following this thread for a while. I believe this piece has two holes in it through which run the 1/4 inch lines to the forward side of the rudder... right? I agree that the lines will perform their function without it there. HOWEVER, Stan put it there for a good reason. These lines may tend to tangle without the piece there, or chafe . You might look at the possibility of screwing through the side of the rudder's housing, but not so deeply as to go into the holes through which the lines feed.
OK, now I feel like part of the community again. Tally ho!
Joe Camp
s/v John Dawson
Bohemia River, MD
From: Chris Cowie <ccowie at cowieassociates.com>
To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
Sent: Sunday, September 11, 2016 8:11 AM
Subject: Re: [Rhodes22-list] Rudders
The top of the screw is buried below the face of the plastic. I am not sure what function this part serves? I thought maybe it stops the rudder or contains the red rudder lines but both seem to function without it.
Christopher P. Cowie [cid:image001.png at 01CA3AD3.5BD581F0] [cid:image002.png at 01CA3AD3.5BD581F0]
4400 MacArthur Blvd, NW<x-apple-data-detectors://1/0>
Suite 300<x-apple-data-detectors://1/0>
Washington, DC 20007<x-apple-data-detectors://1/0>
202.342.2711<tel:202.342.2711> ex.204 ? 202.342.2691<tel:202.342.2691> fax ?202.270.1470<tel:202.270.1470> mobile
[ccowie at cowieassociates.com<mailto:ccowie at cowieassociates.com>]
[cid:image005.png at 01CE8701.15794830]
Please consider the environment before printing this email.
See the original archive post