The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Lowe, Rob



IMF safety modification

2016-09-12; 11:02:28 EDT

Member Since

2003-04-15

Posts: 1937

Yeah, something not right on how this furling line is run.  The line that furls the sail should exit the mast and run under the boom and cleat off under the boom.  The "unfurling line" off the main should attach to clew of the mail, then run through a block on the top of the mast (each one is a bit different), and then pass through the end of the boom so you can cleat it off.  Someone posted these photos which I will reuse.  The second photo shows the black furling line cleated below the boom and the blue unfurling line going through the block, down through the hole at the end of the mast, and cleated off below the mast.  The plastic block on top of the boom is broken, but should attach to the clew.  My boat is not quite set up exactly like this, but hopefully you get the idea.  The only line that would be cleated on the mast would be the topping lift line.  Good luck! - rob

http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20130706/0715caec/attachment.JPG


http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20130706/0715caec/attachment-0001.JPG

Rob Lowe


See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting