The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

D Christensen



IMF safety modification

2016-09-12; 11:42:59 EDT

Member Since

2008-06-03

Posts: 8

Hi All,
You guys are missing the overall concept in the modification. I know what the stock setup is. What I was doing is relocating the lines so you do not have to mess with the boom at all.
What I found was when unfurling, if my wife was not able to keep the boat into the wind the boom was getting forced all over the place when the wind would catch one side of the sail or the other. (dangerous)
Running the unfurling line down the length of the doom and cleating off on the mast is much safer.
As far as furling after deployed, my wife and I frequently sail with the bimini out. If you need to get the sail in after sailing or if gusty conditions need you to bring it in, the bimini is in the way. (dangerous). By installing an exit block over the furling line and bringing it to the side of the mast the bimini is no longer an issue.
With this setup the sail can be deployed or retrived from inside the cabin with the poptop up or you can also reach over if the top is down. (safe)
The two lines are right near each other so there is no wrestling involved.
This modification has worked flawlessly, just trying to share.
Take a look at the pictures I posted with the original post and think it over.
Regards, Rhodes-Guy

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting