The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Scott Fennessey



Boom pin

2017-02-21; 19:24:11 EST

Member Since

2017-02-21

Posts: 2

The lower hole in the mast for the boom pin on my boat is, oddly, too far to the left for the pin to fit in (upper one is fine, never fell out). So I've been sailing with the boom all the way down; it rests on the bottom fitting at the mast so that the boom has sufficient clearance over the cabin top. I keep the boat in a slip without access to power and my cordless drill is not up to the task of drilling a bigger hole. 

Am I running the risk of seeing my mainsail, boom, furler and all, fly out the top of the mast in a big gust?  

Scott Fennessey 
Tomato Sloop

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting