The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Lowe, Rob



wires for mast light

2017-04-12; 15:38:00 EDT

Member Since

2003-04-15

Posts: 1937

Mark,
Do you have access to a volt meter?   That would help in figuring this out.  

My guess is, of the three wires going up the mast, one is probably the positive wire to the steaming light (mounted near the spreaders), one is probably the positive wire going to the anchor light (mounted at the top of the mast) (assume your boat has one, mine does not), and one is probably the common (negative) wire that serves both lights.  It's typical that the white wire is the common wire in most electrical wiring, but who knows in this case.  If you have a 9 volt battery, you can touch it to two of the three prongs and see what light comes on.  Check all three combinations.  If in two cases one of the lights comes on then the wire that is common to both of those tests is the common wire.  If you connect the battery to two terminals and nothing comes on, you have the two positive wires.  

Now to figure out what the wires are in the plug, you'll need the voltmeter.  Turn on your steaming light and with the volt meter, check all the choices in the plug.  You should be able to figure out which is positive and negative for the streaming light.  Now repeat for the anchor light.  You should be able to figure out how to wire your plug from there. - Rob

Rob Lowe


See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting