The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

joedempsey



Mast lighting

2017-04-18; 11:48:58 EDT

Member Since

2016-12-14

Posts: 257

I just completed moving the "masthead" light to a location about 6" above the
spreaders. It was incorrectly labeled an "anchor light" which it is not
because it is not a 32 point light. It is a Perko vertical chrome light. I
presume its the one that Stan installs on the Rhodes. A steaming light only
needs to be located above the side navs (port and starboard) not necessarily
at the masthead, and is a 20 point light (225 deg). An anchor light must be
displayed at a location that it is best visibly displayed. That would
usually on top of the mast (masthead). Because of the mainsail, either
conventional or IMF, you can't add an additional light behind the existing
one. In my case, because of antenna and wind vane, I chose not to install an
anchor light on the peak. Besides, I'm a little old school and I hoist a
lantern (one of those new LED versions)! BTW, I replaced the incandescent
bulb in the Perko with an LED as well as the side lights.  A bid wordy, but
hope this helped.



-----
JP Dempsey
s/v Respite 
Marshall,VA
--
View this message in context: http://rhodes-22.1065344.n5.nabble.com/Mast-lighting-tp52920p53031.html
Sent from the Rhodes 22 mailing list archive at Nabble.com.
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting