On Mon, Aug 14, 2017 at 7:12 PM <peter at sunnybeeches.com> wrote:
> I was finally able to return to Groton with my trailer today. I
> hauled the boat, packed it for travel, and brought it home. Once
> home, I disassembled the furler, and took a look at what was left of
> forestay attachment hardware at the top of the mast.
>> As I suspected, the failure occurred near the top of the mast. The
> forestay wire itself was completely intact. The bit of hardware
> attached to the upper end of the ware failed. At the point of
> failure, it looks like there may be the start of a threaded portion.
> The piece still attached at the top of the mast looks like it’s shaped
> to accept a cylindrical (sp ?) piece of hardware. I’m at a loss to
> recall the bits of gear that allowed this connection to be made.
>> I’ll try to attach a picture of the pieces I found.
>> I hope to visit a rigger in the next day or two in the hopes that a
> professional will be able to figure this out.
>> Peter Nyberg
> Coventry, CT
> s/v Silverheels (1988/2016)
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: Headstay Attachment.jpg
> Type: image/jpeg
> Size: 3346023 bytes
> Desc: not available
> URL: <
>http://rhodes22.org/pipermail/rhodes22-list/attachments/20170814/d2ba561e/attachment.jpg> >
> __________________________________________________
> To subscribe/unsubscribe go to
>http://www.rhodes22.org/mailman/listinfo/rhodes22-list>> For the list Charter and help with using the mailing list and archives go
> to http://www.rhodes22.org/list> __________________________________________________
>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.