The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Mary Lou Troy



IMF Main Removal

2017-10-30; 16:30:00 EDT

Member Since

2004-01-29

Posts: 1598

I suspect yours is similar to what ours was on Fretless. I've documented 
it before  and I'll put what I can find from the list archives as links 
below.

Basically the main is attached to the furling tube inside the mast 
either by being inserted into a slot in the tube and held at the top by 
a piece of webbing through an eye or (in earlier models) being attached 
directly to the tube itself. The 'doughnut'  at the top of the tube 
keeps it in place but is not attached to the mast itself so it spins 
freely within the mast (no swivel, no halyard) and once you've undone 
the mechanism at the bottom of the mast, it slides right out. Your 
mechanic is right - it is a proprietary GBI design (Stan's) and he won't 
see it on any other boat.

This link shows both top and bottom (the 3rd photo is the top) with the 
tube out of the mast.
http://rhodes22.org/pipermail/rhodes22-list/2015-July/078200.html

I've attached a couple of other photos I took the same day. Guess I 
should do something that could go permanently on the rhodes22.org 
website as I have to hunt this up whenever the question arises and I 
never get the same thing twice.

Hope this answers your questions,
Mary Lou
formerly R22 Fretless
now Rosborough RF-246 Tara
Rock Hall, MD




mainsail installation 2010 003sm.jpg

mainsail installation 2010 007sm.jpg

mainsail installation 2010 011sm.jpg

mainsail installation 2010 015sm.jpg
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting