The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Peter Nyberg



Mast Crutch

2018-04-17; 16:18:15 EDT

Member Since

2016-04-14

Posts: 715

Mark,

My boat is currently a couple of towns away in the driveway of a canvas guy who is making a new cover for my Bimini, so I can’t measure anything for you at the moment. However, I can tell you from memory the the roller at the top of my mast crutch (an official GB product) is about 5 feet above the top edge of the transom.

I’m not an engineer, but I’m would guess that if you use the GB mast hoist crane (or something similar) to lower the mast to a crutch that’s much shorter, you’d be putting a lot more stress on the crane and the mast base.  

It’s never even occurred to me to worry about clearance when towing the boat with the mast in the crutch.  If you do have an especially low bridge to clear, then I’d suggest lowering the mast to the aft rail while standing on the lazarette. I’m only about 5’8”, but I can do this without much problem if I first lower one of the uprights that sticks up above the roller.

Peter Nyberg
Coventry, CT
s/v Silverheels (1988/2016)

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting