The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Talbot Pratt



Servicing a centerboard from inside on the trailer

2018-04-23; 14:04:22 EDT

Member Since

2016-06-09

Posts: 24

In preparation from my third season with my 1989 R22 I decided to open up the
trunk and figure out why the board is so loose laterally. Because you
know.... that clunk, clunk, clunk when the board is not under load just
doesn't sound very healthy.  From my reading and looking at the trunk I
think this is the newer diamond shaped board, but not positive. 

After reading all the posts I could find on the subject (which we very
detailed but not really on my topic) I have managed to remove the furniture,
remove all the 1/4"  bolts, and loosen the trunk from the gasket.  But am
unable to removed the trunk I now I realize that there does not appear to be
a way to remove the trunk with the board retracted as the aft upper corner
of the trunk goes under the bulkhead a couple of inches.   

I had always read that the R22 boards can be serviced with the boat on the
trailer.  ie. the board remaining retracted during the service.   Am I
wrong, or did I miss something stupid that someone can explain to me? 

Pictures of my centerboard trunk below.   
 https://photos.app.goo.gl/U28UICtKynKjS6Ma2
https://photos.app.goo.gl/VcPqqHZrEUVZ8caj2

Thanks,
Talbot    978 801 1602




-----
Talbot Pratt
S/V  "Remains Nameless"
Red bank, NJ  978 801 1602
--
Sent from: http://rhodes-22.1065344.n5.nabble.com/
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting