2018-06-01; 14:21:42 EDT
Member Since
2016-12-14
Posts: 257
I've read much of the commentary on anchoring and the anchor tray on the forum. Has anyone considered installing a drain to the bilge from the tray in the foc'sil? So far I've kept my anchor rode in the tray with a cowl vent in the deck port for ventilation. Being concerned with dampness, I've installed a solar powered vent in the pop top that provides constant airflow sucking through the forward cowl vent. I figure that this should provide sufficient ventilation to dry the anchor rode after anchoring. Usually I'll let the rode air out on the fore deck prior to feeding back down to the tray. This doesn't address the issue of slime, mud, etc. I have hosed down the anchor rode after returning to dock but this requires leaving it on the deck longer than I'd like and especially during docking. Not good. I'm thinking of putting a drain in the bottom of the tray with a hose to the bilge so rain/spray entering the cowl vent can drain to the bilge rather than collect in the tray. Any thoughts on this viz. reasons not to do this? Thanks for your ideas. Joe ----- JP Dempsey s/v Respite Marshall,VA -- Sent from: http://rhodes-22.1065344.n5.nabble.com/See the original archive post