< prior
Back to Month
Go to Thread
2018-08-20; 08:48:47 EDT
Member Since
2010-03-25
Posts: 31
Graham, here’s the two pictures of the v block. Hope pictures will go through. I placed the order for neoprene. image1.jpeg image2.jpegSee the original archive post
> On Aug 19, 2018, at 10:57 AM, Curtis Ruck via Rhodes22-list <rhodes22-list at rhodes22.org> wrote: > > It is definitely closed cell, to my knowledge all neoprene is. I looked > at the different thicknesses and soft/firm and ordered two actually, a 1/4" > that was more firm, and the 3/16. When I got them, decided on the 3/16, > because once compressed, its basically solid rubber, and the surface of my > trunk was less than perfectly smooth, so i chose it based on > compress-ability. > > I don't believe it leaks, but its never been in the water long enough to > really tell. I'd wager it does, but without having a slip to keep it in, i > have no real way to know. > -- > Curtis > > >> On Sun, Aug 19, 2018 at 8:41 AM Graham Stewart <gstewart8 at cogeco.ca> wrote: >> >> The neoprene that Curtis found looks great but is referred to a "sponge" >> neoprene. I expect that means it is softer than the usual stuff and might >> make a better seal assuming that it is closed cell. Does anyone have a more >> informed opinion than mine on this difference? >> >> Graham >> >> -----Original Message----- >> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf >> Of Curtis Ruck via Rhodes22-list >> Sent: Saturday, August 18, 2018 7:26 PM >> To: The Rhodes 22 Email List >> Subject: Re: [Rhodes22-list] Rubber gasket >> >> I used this from Amazon: >> >> https://www.amazon.com/gp/product/B003HDILE4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 >> on my 1979. Seems to work, but mine is only in the water ~2-3 hours a >> time, and there is always water in the bilge when I start sailing (I >> believe due to the cockpit drains getting clogged, and the water making up >> and in the cockpit storage, which drains through to the bilge. >> -- >> Curtis >> >> >> On Sat, Aug 18, 2018 at 6:40 PM Graham Stewart <gstewart8 at cogeco.ca> >> wrote: >> >>> Just so that there is no confusion, I did make a neoprene gasket and it >> is >>> installed. It is 3/16 thick but has a fine ribbed pattern that I think >> did >>> not compress enough to make a perfect seal. It might also be too hard. >> So I >>> am only using the butyl to give the neoprene a smoother surface - not >>> substituting the neoprene with the butyl. Nevertheless, I think I will >>> replace the gasket when I can find a Canadian source. >>> >>> Another issue that might explain my difficulty getting a good seal is >> that >>> it looks to me like the flange on the cap might have been trimmed at some >>> point. The lip is only about 1 1/4 inch wide and allows for only a single >>> row of bolts. The base is quite a bit wider and appears to have had a >>> second row of bolts at some point. It makes sense that both parts would >> be >>> the same width. >>> >>> I really don't want to take this apart again to replace the gasket and >>> rebuild the cap. >>> >>> Graham >>> >>> -----Original Message----- >>> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On >> Behalf >>> Of Gary Novotny >>> Sent: Saturday, August 18, 2018 2:40 PM >>> To: The Rhodes 22 Email List >>> Subject: Re: [Rhodes22-list] Rubber gasket >>> >>> Yep, totally agree that things bedded with urethane sealants are a bitch >>> to remove. Only use this stuff as a last resort if you can’t find proper >>> gasket material. Also I'd be sure the pendant and all blocks are in >>> excellent condition. If not, definitely replace. The problem I see with >>> Butyl for this application is that it has no adhesive properties , so >>> you are counting on the cap to trunk compression to keep it sealed and >>> it’s not resilient like a neoprene gasket. If the trunk is subject to >>> any significant flexing at all then the compression seal could start to >>> develop leaks. If I did use Butyl tape, I'd keep a close eye on it. One >>> good thing is that Butyl tape would be VERY easy to replace. >>> >>> Gary >>> >>> >>>> On 8/18/2018 12:55 PM, Graham Stewart wrote: >>>> Like Gary I used butyl extensively as a bedding material for my >> hardware >>> and it is a dream to use compared to other sealants. The only place below >>> the waterline where I used it was the centerboard cap and only then >> because >>> I was getting desperate to find a solution. Gary's cautionary note is >> good >>> reason to keep looking for the proper neoprene - something I will do >>> if/when the butyl fails or I have to remove the cap for any other reason. >>>> >>>> 4200 sealant is easier to remove than 5200, which is almost impossible >>> without destroying the parts, but would still be extremely difficult - >>> especially for such a large area. When I bought my boat a previous owner >>> had used one of those high-adhesive sealants and I spent literally days >>> getting the cap off using a torch to heat a large knife that I slowly >> moved >>> along the join. Even then I still broke the cap into two pieces and had >> to >>> make extensive repairs to the cap and the base. >>>> >>>> I don't know if there is anything like butyl that has low adhesive >>> characteristics and is still rated for below the waterline use. >>>> >>>> For the time being the butyl is working but I will let the list know if >>> it begins to fail - assuming the boat doesn't sink and take me with it. >>>> >>>> >>>> Graham Stewart >>>> Agile 1976 Rhodes 22 >>>> Kingston Ontario >>>> >>>> >>>> >>>> >>>> -----Original Message----- >>>> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On >>> Behalf Of Gary Novotny >>>> Sent: Saturday, August 18, 2018 9:38 AM >>>> To: The Rhodes 22 Email List >>>> Subject: Re: [Rhodes22-list] Rubber gasket >>>> >>>> Guys, >>>> >>>> I love Butyl tape, it's really great as a bedding compound. I completed >>>> the first round of restoration on a boat (not my Rhodes) three months >>>> ago and I used this stuff extensively for all the deck fittings and a >>>> hatch. Butyl tape like all sealants needs a clean surface so use Remov >>>> or DeBond first if the surface has prior sealant contamination. I can't >>>> say enough good things about the ease of Butyl tape installation and >>>> cleanup. All the leaking fittings are fixed now. It is too early for me >>>> to report on longevity, but others have had very good results and when >>>> you do need to re-bed its easy. >>>> >>>> I wouldn't be comfortable using this below the waterline however. If >> you >>>> can't get neoprene sheet, you might be better off resorting to a >>>> traditional moderately adhesive sealant like 3M 4200. (Do NOT use 5200) >>>> >>>> Just my 2cents. >>>> >>>> Gary >>>> >>>> >>>>> On 8/17/2018 2:56 PM, Graham Stewart wrote: >>>>> Patrick: >>>>> >>>>> Glad to hear that there is another Rhodie in Canada. I thought Phil >>> Gautier and I were the only ones. >>>>> >>>>> I replaced my gasket last year but was unable to find the proper >>> neoprene. I finally got some neoprene from a neighbor but it wasn't >> smooth >>> surfaced so it leaked no matter how many bolts I added. I finally stopped >>> the leaks by using butyl tape - not an ideal solution, but it worked >> well. >>> Butyl is an excellent sealant but has very low adhesive qualities so it >>> should be easy to remove in the future should that be necessary. The tape >>> is about 3/4" wide but I only used about half of that on both sides of >> the >>> gasket as I didn't want to have it squeeze into the centerboard slot. I >>> would not use the butyl that comes in a tube. In fact only use the butyl >> if >>> you can't get the proper neoprene. >>>>> >>>>> >>>>> Graham Stewart >>>>> Agile 1976 Rhodes 22 >>>>> Kingston Ontario. >>>>> >>>>> >>>>> -----Original Message----- >>>>> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On >>> Behalf Of Patrick Cheung >>>>> Sent: Friday, August 17, 2018 2:11 PM >>>>> To: The Rhodes 22 Email List >>>>> Subject: Re: [Rhodes22-list] Rubber gasket >>>>> >>>>> Gary, >>>>> >>>>> I found the perfect one from Amazon but they won’t ship to Canada. >>> Gonna keep looking. >>>>> >>>>> Thx, Patrick >>>>> >>>>> >>>>> >>>>>> On Aug 17, 2018, at 1:32 PM, Gary Novotny <gjnovotny at comcast.net> >>> wrote: >>>>>> >>>>>> Patrick, >>>>>> >>>>>> When I did my centerboard trunk maintenance four years ago I used >>> neoprene sheet I bought off of Amazon. It seems to have worked well. >>>>>> >>>>>> Gary >>>>>> >>>>>> Moon shadow 1978 R22 >>>>>> >>>>>> >>>>>>> On 8/17/2018 11:50 AM, Patrick Cheung wrote: >>>>>>> Dear Rhodies, >>>>>>> >>>>>>> It is time to repair the center board. I reached out to Stan for a >>> piece of >>>>>>> the rubber but he is super busy right now. >>>>>>> >>>>>>> I seems to recall some Rhodies may have extra rubber left over from >>> their >>>>>>> repair. I am hoping I can buy a stripe off you, if you are willing >> to >>> sell. >>>>>>> >>>>>>> Patrick >>>>>>> Duck, '84 >>>>>>> Lake Simcoe, Ontario, Canada >>>>>>> __________________________________________________ >>>>>>> To subscribe/unsubscribe go to >>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >>>>>>> >>>>>>> For the list Charter and help with using the mailing list and >>> archives go to http://www.rhodes22.org/list >>>>>>> __________________________________________________ >>>>>>> >>>>>> -- >>>>>> Gary Novotny >>>>>> 7309 S Indian River Drive >>>>>> Fort Pierce Florida 34982 >>>>>> 772-4660956 home >>>>>> 772-9715753 cell >>>>>> gjnovotny at comcast.net >>>>>> >>>>>> __________________________________________________ >>>>>> To subscribe/unsubscribe go to >>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >>>>>> >>>>>> For the list Charter and help with using the mailing list and >> archives >>> go to http://www.rhodes22.org/list >>>>>> __________________________________________________ >>>>> __________________________________________________ >>>>> To subscribe/unsubscribe go to >>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >>>>> >>>>> For the list Charter and help with using the mailing list and archives >>> go to http://www.rhodes22.org/list >>>>> __________________________________________________ >>>>> >>>>> __________________________________________________ >>>>> To subscribe/unsubscribe go to >>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >>>>> >>>>> For the list Charter and help with using the mailing list and archives >>> go to http://www.rhodes22.org/list >>>>> __________________________________________________ >>> >>> -- >>> Gary Novotny >>> 7309 S Indian River Drive >>> Fort Pierce Florida 34982 >>> 772-4660956 home >>> 772-9715753 cell >>> gjnovotny at comcast.net >>> >>> __________________________________________________ >>> To subscribe/unsubscribe go to >>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >>> >>> For the list Charter and help with using the mailing list and archives go >>> to http://www.rhodes22.org/list >>> __________________________________________________ >>> >>> __________________________________________________ >>> To subscribe/unsubscribe go to >>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >>> >>> For the list Charter and help with using the mailing list and archives go >>> to http://www.rhodes22.org/list >>> __________________________________________________ >>> >> __________________________________________________ >> To subscribe/unsubscribe go to >> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >> >> For the list Charter and help with using the mailing list and archives go >> to http://www.rhodes22.org/list >> __________________________________________________ >> >> > __________________________________________________ > To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list > __________________________________________________
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 