< prior
Back to Month
Go to Thread
2018-08-20; 11:14:38 EDT
Member Since
2004-10-28
Posts: 1565
Gary, Where do you see the centerboard? It looks like asphalt and the roller from a trailer to me. HankSee the original archive post
On Mon, Aug 20, 2018 at 11:10 AM Gary Novotny <gjnovotny at comcast.net> wrote: > Patrick, > > Your second picture looking down into the trunk shows what looks like > the top of the centerboard that is missing fiberglass on the top. > > If I'm correct, you probably know this already, but just in case, you > definitely want to re-glass and completely encapsulate the centerboard > to prevent water intrusion and prevent unwanted expansion. > > This is probably why you doing this project in the first place but not > knowing the full story I though I'd better state the obvious anyway. > > Gary > > > On 8/20/2018 8:48 AM, Patrick Cheung wrote: > > Graham, here’s the two pictures of the v block. Hope pictures will go > through. > > > > I placed the order for neoprene. > > -------------- next part -------------- > > A non-text attachment was scrubbed... > > Name: image1.jpeg > > Type: image/jpeg > > Size: 77567 bytes > > Desc: not available > > URL: < > http://rhodes22.org/pipermail/rhodes22-list/attachments/20180820/496c528a/attachment.jpeg > > > > -------------- next part -------------- > > > > > > -------------- next part -------------- > > A non-text attachment was scrubbed... > > Name: image2.jpeg > > Type: image/jpeg > > Size: 76674 bytes > > Desc: not available > > URL: < > http://rhodes22.org/pipermail/rhodes22-list/attachments/20180820/496c528a/attachment-0001.jpeg > > > > -------------- next part -------------- > > > > > >> On Aug 19, 2018, at 10:57 AM, Curtis Ruck via Rhodes22-list < > rhodes22-list at rhodes22.org> wrote: > >> > >> It is definitely closed cell, to my knowledge all neoprene is. I > looked > >> at the different thicknesses and soft/firm and ordered two actually, a > 1/4" > >> that was more firm, and the 3/16. When I got them, decided on the 3/16, > >> because once compressed, its basically solid rubber, and the surface of > my > >> trunk was less than perfectly smooth, so i chose it based on > >> compress-ability. > >> > >> I don't believe it leaks, but its never been in the water long enough to > >> really tell. I'd wager it does, but without having a slip to keep it > in, i > >> have no real way to know. > >> -- > >> Curtis > >> > >> > >>> On Sun, Aug 19, 2018 at 8:41 AM Graham Stewart <gstewart8 at cogeco.ca> > wrote: > >>> > >>> The neoprene that Curtis found looks great but is referred to a > "sponge" > >>> neoprene. I expect that means it is softer than the usual stuff and > might > >>> make a better seal assuming that it is closed cell. Does anyone have a > more > >>> informed opinion than mine on this difference? > >>> > >>> Graham > >>> > >>> -----Original Message----- > >>> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On > Behalf > >>> Of Curtis Ruck via Rhodes22-list > >>> Sent: Saturday, August 18, 2018 7:26 PM > >>> To: The Rhodes 22 Email List > >>> Subject: Re: [Rhodes22-list] Rubber gasket > >>> > >>> I used this from Amazon: > >>> > >>> > https://www.amazon.com/gp/product/B003HDILE4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 > >>> on my 1979. Seems to work, but mine is only in the water ~2-3 hours a > >>> time, and there is always water in the bilge when I start sailing (I > >>> believe due to the cockpit drains getting clogged, and the water > making up > >>> and in the cockpit storage, which drains through to the bilge. > >>> -- > >>> Curtis > >>> > >>> > >>> On Sat, Aug 18, 2018 at 6:40 PM Graham Stewart <gstewart8 at cogeco.ca> > >>> wrote: > >>> > >>>> Just so that there is no confusion, I did make a neoprene gasket and > it > >>> is > >>>> installed. It is 3/16 thick but has a fine ribbed pattern that I think > >>> did > >>>> not compress enough to make a perfect seal. It might also be too hard. > >>> So I > >>>> am only using the butyl to give the neoprene a smoother surface - not > >>>> substituting the neoprene with the butyl. Nevertheless, I think I will > >>>> replace the gasket when I can find a Canadian source. > >>>> > >>>> Another issue that might explain my difficulty getting a good seal is > >>> that > >>>> it looks to me like the flange on the cap might have been trimmed at > some > >>>> point. The lip is only about 1 1/4 inch wide and allows for only a > single > >>>> row of bolts. The base is quite a bit wider and appears to have had a > >>>> second row of bolts at some point. It makes sense that both parts > would > >>> be > >>>> the same width. > >>>> > >>>> I really don't want to take this apart again to replace the gasket and > >>>> rebuild the cap. > >>>> > >>>> Graham > >>>> > >>>> -----Original Message----- > >>>> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On > >>> Behalf > >>>> Of Gary Novotny > >>>> Sent: Saturday, August 18, 2018 2:40 PM > >>>> To: The Rhodes 22 Email List > >>>> Subject: Re: [Rhodes22-list] Rubber gasket > >>>> > >>>> Yep, totally agree that things bedded with urethane sealants are a > bitch > >>>> to remove. Only use this stuff as a last resort if you can’t find > proper > >>>> gasket material. Also I'd be sure the pendant and all blocks are in > >>>> excellent condition. If not, definitely replace. The problem I see > with > >>>> Butyl for this application is that it has no adhesive properties , so > >>>> you are counting on the cap to trunk compression to keep it sealed and > >>>> it’s not resilient like a neoprene gasket. If the trunk is subject to > >>>> any significant flexing at all then the compression seal could start > to > >>>> develop leaks. If I did use Butyl tape, I'd keep a close eye on it. > One > >>>> good thing is that Butyl tape would be VERY easy to replace. > >>>> > >>>> Gary > >>>> > >>>> > >>>>> On 8/18/2018 12:55 PM, Graham Stewart wrote: > >>>>> Like Gary I used butyl extensively as a bedding material for my > >>> hardware > >>>> and it is a dream to use compared to other sealants. The only place > below > >>>> the waterline where I used it was the centerboard cap and only then > >>> because > >>>> I was getting desperate to find a solution. Gary's cautionary note is > >>> good > >>>> reason to keep looking for the proper neoprene - something I will do > >>>> if/when the butyl fails or I have to remove the cap for any other > reason. > >>>>> 4200 sealant is easier to remove than 5200, which is almost > impossible > >>>> without destroying the parts, but would still be extremely difficult > - > >>>> especially for such a large area. When I bought my boat a previous > owner > >>>> had used one of those high-adhesive sealants and I spent literally > days > >>>> getting the cap off using a torch to heat a large knife that I slowly > >>> moved > >>>> along the join. Even then I still broke the cap into two pieces and > had > >>> to > >>>> make extensive repairs to the cap and the base. > >>>>> I don't know if there is anything like butyl that has low adhesive > >>>> characteristics and is still rated for below the waterline use. > >>>>> For the time being the butyl is working but I will let the list know > if > >>>> it begins to fail - assuming the boat doesn't sink and take me with > it. > >>>>> > >>>>> Graham Stewart > >>>>> Agile 1976 Rhodes 22 > >>>>> Kingston Ontario > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> -----Original Message----- > >>>>> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On > >>>> Behalf Of Gary Novotny > >>>>> Sent: Saturday, August 18, 2018 9:38 AM > >>>>> To: The Rhodes 22 Email List > >>>>> Subject: Re: [Rhodes22-list] Rubber gasket > >>>>> > >>>>> Guys, > >>>>> > >>>>> I love Butyl tape, it's really great as a bedding compound. I > completed > >>>>> the first round of restoration on a boat (not my Rhodes) three months > >>>>> ago and I used this stuff extensively for all the deck fittings and a > >>>>> hatch. Butyl tape like all sealants needs a clean surface so use > Remov > >>>>> or DeBond first if the surface has prior sealant contamination. I > can't > >>>>> say enough good things about the ease of Butyl tape installation and > >>>>> cleanup. All the leaking fittings are fixed now. It is too early for > me > >>>>> to report on longevity, but others have had very good results and > when > >>>>> you do need to re-bed its easy. > >>>>> > >>>>> I wouldn't be comfortable using this below the waterline however. If > >>> you > >>>>> can't get neoprene sheet, you might be better off resorting to a > >>>>> traditional moderately adhesive sealant like 3M 4200. (Do NOT use > 5200) > >>>>> > >>>>> Just my 2cents. > >>>>> > >>>>> Gary > >>>>> > >>>>> > >>>>>> On 8/17/2018 2:56 PM, Graham Stewart wrote: > >>>>>> Patrick: > >>>>>> > >>>>>> Glad to hear that there is another Rhodie in Canada. I thought Phil > >>>> Gautier and I were the only ones. > >>>>>> I replaced my gasket last year but was unable to find the proper > >>>> neoprene. I finally got some neoprene from a neighbor but it wasn't > >>> smooth > >>>> surfaced so it leaked no matter how many bolts I added. I finally > stopped > >>>> the leaks by using butyl tape - not an ideal solution, but it worked > >>> well. > >>>> Butyl is an excellent sealant but has very low adhesive qualities so > it > >>>> should be easy to remove in the future should that be necessary. The > tape > >>>> is about 3/4" wide but I only used about half of that on both sides of > >>> the > >>>> gasket as I didn't want to have it squeeze into the centerboard slot. > I > >>>> would not use the butyl that comes in a tube. In fact only use the > butyl > >>> if > >>>> you can't get the proper neoprene. > >>>>>> > >>>>>> Graham Stewart > >>>>>> Agile 1976 Rhodes 22 > >>>>>> Kingston Ontario. > >>>>>> > >>>>>> > >>>>>> -----Original Message----- > >>>>>> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On > >>>> Behalf Of Patrick Cheung > >>>>>> Sent: Friday, August 17, 2018 2:11 PM > >>>>>> To: The Rhodes 22 Email List > >>>>>> Subject: Re: [Rhodes22-list] Rubber gasket > >>>>>> > >>>>>> Gary, > >>>>>> > >>>>>> I found the perfect one from Amazon but they won’t ship to Canada. > >>>> Gonna keep looking. > >>>>>> Thx, Patrick > >>>>>> > >>>>>> > >>>>>> > >>>>>>> On Aug 17, 2018, at 1:32 PM, Gary Novotny <gjnovotny at comcast.net> > >>>> wrote: > >>>>>>> Patrick, > >>>>>>> > >>>>>>> When I did my centerboard trunk maintenance four years ago I used > >>>> neoprene sheet I bought off of Amazon. It seems to have worked well. > >>>>>>> Gary > >>>>>>> > >>>>>>> Moon shadow 1978 R22 > >>>>>>> > >>>>>>> > >>>>>>>> On 8/17/2018 11:50 AM, Patrick Cheung wrote: > >>>>>>>> Dear Rhodies, > >>>>>>>> > >>>>>>>> It is time to repair the center board. I reached out to Stan for a > >>>> piece of > >>>>>>>> the rubber but he is super busy right now. > >>>>>>>> > >>>>>>>> I seems to recall some Rhodies may have extra rubber left over > from > >>>> their > >>>>>>>> repair. I am hoping I can buy a stripe off you, if you are willing > >>> to > >>>> sell. > >>>>>>>> Patrick > >>>>>>>> Duck, '84 > >>>>>>>> Lake Simcoe, Ontario, Canada > >>>>>>>> __________________________________________________ > >>>>>>>> To subscribe/unsubscribe go to > >>>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list > >>>>>>>> For the list Charter and help with using the mailing list and > >>>> archives go to http://www.rhodes22.org/list > >>>>>>>> __________________________________________________ > >>>>>>>> > >>>>>>> -- > >>>>>>> Gary Novotny > >>>>>>> 7309 S Indian River Drive > >>>>>>> Fort Pierce Florida 34982 > >>>>>>> 772-4660956 home > >>>>>>> 772-9715753 cell > >>>>>>> gjnovotny at comcast.net > >>>>>>> > >>>>>>> __________________________________________________ > >>>>>>> To subscribe/unsubscribe go to > >>>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list > >>>>>>> For the list Charter and help with using the mailing list and > >>> archives > >>>> go to http://www.rhodes22.org/list > >>>>>>> __________________________________________________ > >>>>>> __________________________________________________ > >>>>>> To subscribe/unsubscribe go to > >>>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list > >>>>>> For the list Charter and help with using the mailing list and > archives > >>>> go to http://www.rhodes22.org/list > >>>>>> __________________________________________________ > >>>>>> > >>>>>> __________________________________________________ > >>>>>> To subscribe/unsubscribe go to > >>>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list > >>>>>> For the list Charter and help with using the mailing list and > archives > >>>> go to http://www.rhodes22.org/list > >>>>>> __________________________________________________ > >>>> -- > >>>> Gary Novotny > >>>> 7309 S Indian River Drive > >>>> Fort Pierce Florida 34982 > >>>> 772-4660956 home > >>>> 772-9715753 cell > >>>> gjnovotny at comcast.net > >>>> > >>>> __________________________________________________ > >>>> To subscribe/unsubscribe go to > >>>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list > >>>> > >>>> For the list Charter and help with using the mailing list and > archives go > >>>> to http://www.rhodes22.org/list > >>>> __________________________________________________ > >>>> > >>>> __________________________________________________ > >>>> To subscribe/unsubscribe go to > >>>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list > >>>> > >>>> For the list Charter and help with using the mailing list and > archives go > >>>> to http://www.rhodes22.org/list > >>>> __________________________________________________ > >>>> > >>> __________________________________________________ > >>> To subscribe/unsubscribe go to > >>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list > >>> > >>> For the list Charter and help with using the mailing list and archives > go > >>> to http://www.rhodes22.org/list > >>> __________________________________________________ > >>> > >>> > >> __________________________________________________ > >> To subscribe/unsubscribe go to > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > >> > >> For the list Charter and help with using the mailing list and archives > go to http://www.rhodes22.org/list > >> __________________________________________________ > > __________________________________________________ > > To subscribe/unsubscribe go to > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > > > For the list Charter and help with using the mailing list and archives > go to http://www.rhodes22.org/list > > __________________________________________________ > > -- > Gary Novotny > 7309 S Indian River Drive > Fort Pierce Florida 34982 > 772-4660956 home > 772-9715753 cell > gjnovotny at comcast.net > > __________________________________________________ > To subscribe/unsubscribe go to > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives go > to http://www.rhodes22.org/list > __________________________________________________ >
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 