The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Patrick Cheung



Rubber gasket

2018-08-20; 14:36:53 EDT

Member Since

2010-03-25

Posts: 31

Graham,

My boat is from 1984. I had 48 screws, I shall replace with lock nut, bolt
and washers.

I remembered reading the archive, I am not the only one with V block, he
also had the problem with leak through the screws penetrated through the
side wall.

This V block is approximately 6" from the Aft. The black marker line on the
flange is approx. 6" from the aft.

My original problem is the center board unable to be lowered. After opening
the cap, I found the control line is oversized, and it is unable to pass
through 2 of the 4 blocks happily. I shall replace with 1/4" line. The rest
of the system, blocks, center board all seems to be ok. So this should be a
easy fix. Patch the 2 holes, new paint for the trunk and the board, new
neoprene. That should do it.

patrick



See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting