The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Graham Stewart



Where to find parts?

2019-01-07; 22:47:31 EST

Member Since

2005-04-29

Posts: 816

Alexis:

The photos didn't come through properly. What year is your boat? Mine is an
older boat built in 1976. I know that in later years Stan substantially
improved the deck construction.

I found that the plywood core of my boat had gradually delaminated
throughout the deck. Not only that, but the various layers of the plywood
had also delaminated and the top layer had delaminated from the deck skin as
well. The plywood seemed to be just cheap plywood and the adhesive that
bound it all to the skins seemed to be sealant that was spread with a
calking gun very sparingly and often had not even been squeezed against the
glass. I was able to separate the liner from the plywood and remove most of
the plywood from the deck skin with my hands. What I thought might be rot,
when I found the deck had become soft, was delamination. 

I have posted photos and descriptions of what I did to repair the deck and
that should all be in the archives but if you are interested and can't find
the postings I can send it out again. In the mean time I have attached two
picture of the edge of the deck after I cut the foredeck off. You will see
the delimitation.

If the deck isn't soft or giving you other problems I would let it pass. The
fix, which involves injecting epoxy through the deck skin into the core is
time consuming and also requires that the deck skin be restored. That was a
huge amount of work and might well be unnecessary.

Graham

Graham Stewart
Agile 1976 Rhodes 22
Kingston Ontario






Rhodes  foredeck removed July 2009 a.jpg

Rhodes  deck delamination July 2009 a.jpg
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting