The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

ROGER PIHLAJA



Floor Board Removal and Repair

2019-04-15; 11:34:36 EDT

Member Since

2002-08-01

Posts: 1438

Rob,

The main reason I like to use 2 layers of sealant + a gasket has to do with loading and hull flex when the boat is sitting on the trailer vs when it’s in the water.  The chances are, the boat will be on the trailer when the CB cap is installed.  I like having 2 silicone RTV joints + the rubber gasket to absorb the shear loading in the CB flange/CB gasket joint when the hull flexes differently when it goes from the trailer into the water.  There are similar issues with hull flex when the boat is pounding to weather in waves.  As long as the silicone RTV is kept loaded in compression by the flange joint, it has sufficient elasticity to absorb the shear deformation from hull flex and not leak.

Roger Pihlaja
S/V Dynamic Equilbrium

Sent from my iPhone

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting