On Mon, Apr 29, 2019, 6:16 PM Chris on LBI <cknell at vt.edu> wrote:
> Hi Stan,
>> Thank you for the shims. That is great news about the parts division.
>> I believe the rare disease you refer to was probably caused by lack of
> proper maintenance. When I purchased the boat on the second-hand market,
> the
> bolt holding the spreader sockets was very loose as were all nine of the
> shrouds/stays; the shims were not present. As an indication of how long
> this
> condition had existed, the threads on the bolt were completely worn away
> for
> about 1/4 of an inch at the point where the (loose) bolt passes through the
> mast near the end secured by the nut. My guess is that the loose shrouds
> led
> to a loosening of the nut and that subsequent motion of the spreader socket
> wore the shims to the point where they abandoned ship.
>> As I write this, I realize that I probably should replace the bolt as well;
> is it stainless steel?
>> Thanks,
> Chris on LBI
>>>>> -----
> Long Beach Island
> --
> Sent from: http://rhodes-22.1065344.n5.nabble.com/>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.